What wrench fits what?

• Torx T25
  • control housing screws


• Torx T27
  • clutch inspection cover
  • control clamps


• Torx T40
  • front brake disk
  • front wheel hub plate


• Torx T45
  • rear brake disk mounting bolts
  • fork bracket pinch screws


• 4.5 mm Allen
  • ball head mount for front turn signals


• 6 or 7 mm Allen (anybody know which?)
  • fork damper tube screw


• 5/32 Allen
  • sissy bar mounting screws
  • primary chain inspection cover screws


• 3/16 Allen
  • primary cover screws
  • rocker box cover screws
  • gearcase cover
  • sprocket cover
  • sissy bar side plate mounting screws


• 1/4 Allen
  • front fender bolts
  • handlebar clamp bolts
  • eyebrow bolts
  • coil bracket bolt
  • left footpeg mount screws
  • rear master cylinder mounting screws
  • belt guard mounting screw
  • intake manifold to head
  • primary adjuster screw


• 5/16 Allen
  • upper engine mounts
  • front axle pinch bolt
  • air cleaner mounting screws


• 3/8 Allen
  • timing plug


• 5/16 Hex
  • heat shield worm drive clamps
  • brake line mounting clips
  • horn mounting bracket screws


• 3/8 Hex
  • voltage regulator mounting screws


• 7/16 Hex
  • coil mounting screws
  • battery strap nut
  • brake pedal adjustment screw


• 10mm Hex
  • horn mounting nut
  • battery terminal screw
  • throttle cable adjustment jam nut


• 1/2 Hex
  • front fender bolt nuts
  • enricher bracket
  • front directional signal mounts
  • mirror mount
  • coil bracket bolt
  • brake pedal adjustment screw locknut


• 9/16 Hex
  • lower front engine mounts
  • front axle pinch bolt
  • upper shock mounting bolt
  • belt tension adjuster screws
  • upper front engine mount screws
  • rear engine mount bolts


• 5/8 Hex
  • front directional swivel nut
  • spark plugs


• 11/16 Hex
  • lower front engine mount flange nuts


• 3/4 Hex
  • front axle nut
  • lower shock mounting bolt
  • headlight mounting bolt


• 7/8 Hex
  • primary chain adjuster screw locknut


• 15/16 Hex
  • rear axle nut
  • stem bolt


• 1 3/8 Hex
  • fork tube cap


• 3/8 Twelve Point
  • caliper banjo bolts
  • rear master cylinder banjo bolt


• 7/16 Twelve Point
  • front master cylinder banjo bolt


• 1/2 Twelve Point
  • head screws


• #1 Phillips
  • headlight clamp ring
  • directional signal lens screws
  • taillight lens screws


• #3 Phillips
  • ignition module cover screws


• #4 Phillips
  • air cleaner cover screws

return to the front page